GPIO

GPIO block

GPIO MESH-100GP

It’s for advanced users.

This gray GPIO (General Purpose Input Output) block enables you to enjoy wireless electronic kits and more. It has a digital and analog input/output that connects other sensors or actuators, such as light sensors, motors and written circuit with a conductive pen.

What the GPIO block can do

Digital In

Digital In

When your block receives a digital signal, it will report to the app.

Pin:
You can choose your pin position from 3 choices.

Trigger:
You can choose from 2 options (Low->High: When a digital sign changes from Low to High, High->Low: When a digital sign changes from High to Low)

Digital Out

Digital Out

When your block receives a command from the app, it will output a digital signal.

Pin:
You can choose your pin position from 3 choices.

Value:
You can set the strength of the digital output signal, either high or low.

Analog In

Analog In

When it receives an analog sign, it will report to the app.

Pin:
You can choose your pin position from 3 choices.

Trigger:
You can choose from 2 options: Your block will report to the app when it is lower than a specified level, your block will report to the app when it reaches a specified level.

Threshold:
You can choose your range from 0.05V-2.95V.

PWM Out

PWM Out

Your block will output a digital signal when it receives a command from the app.

Pin:
You can check your pin position.

Duty ratio:
You can set the ratio within the parameters of 0 to 100.

VOut Supply

VOut Supply

You can start or stop supplying power source.

Pin:
You can check your pin position.

Value:
On= It will start supplying the power source / Off= It will stop supplying the power source

Product Description

Name Sony MESH Wireless Functional block
GPIO block
Model Number MESH-100GP
JAN Code 4548736011854
Dimensions
Approx.
0.94 in × 1.89 in × 0.47 in (24mm x 48mm x 12mm) (w/h/d)
Mass Approx. 0.46 oz (13g)
Communication System Bluetooth Specification version 4.0 (Bluetooth Low Energy)
Maximum communication range Line of sight approx. 30 ft (10m)
Power source Built-in Rechargeable Battery
External interface Micro USB (charging only)
Operating temperature 32°F to 95°F (0°C to 35°C)
Charging time Approx. 1 hour
Operating System Please check here.
Connector spec. 10 pin, 2.54mm pitch pin socket
Pin Positions Digital In x 3 pins
Digital Out x 3 pins
Analog In x 1 pin
PWM Out x 1 pin
Vo x 1 pin
GND x 1 pin
You can check for further information from here.
Power Supply Source Function Vo: 3.3V / 100mA (Max) (With inner battery)
3.3V / 250mA (Max) (When it’s receiving power supply from Micro-USB)

The functions and appearance of this block may be subject to change.

MESH blocks lineup

  • LED block
  • Button block
  • Motion block
  • Move block
  • Brightness block
  • Temperature & Humidity block
  • GPIO block